ParkSEIS | AUTOMATIC Processing Data From ReMi* Survey for 1D/2D Velocity (Vs) Profiling

[*Passive (or Active-Passive) MASW Survey with Linear Receiver Array]

1. Specifying Survey Mode

When importing input seismic file(s), specify to set up source/receiver (SR) configurations.  Select "Run Wizard" option, and then select "Passive" option for survey type.  Then, select "1-D" for receiver array type as illustrated below.

After completion of source/receiver (SR) setup, click "Run AUTO" as illustrated below.

2. Final Output